75
GENER
A
L MAINTENAN
CE
1. Remove the cap screw (1) securing
spark arrester; then remove the
arrester (2).
KM139A
2. Using a brush, clean the carbon
deposits from the arrester screen
(3) taking care not to damage the
screen.
KM140B
NOTE: If the screen is damaged
in any way, it must be replaced.
3. Install the spark arrester and
secure with the cap screw.
LIGHT BULB
REPLACEMENT
The wattage rating of each bulb is
shown in the chart. When replacing a
burned bulb, always use the same watt-
age rating.
Headlight
NOTE: The bulb portion of the
headlight is fragile. HANDLE WITH
CARE. When replacing the head-
light bulb, do not touch the glass
portion of the bulb. If the glass is
touched, it must be cleaned with a
dry cloth before installing. Skin oil
residue on the bulb will shorten
the life of the bulb.
To replace the headlight bulb, use the
following procedure.
1. Remove the rubber boot from the
back of the headlight housing; then
remove the three-wire connector
from the bulb.
KM194A
2. Release the two ends of the spring
clip from the headlight housing
taking care not to bend or deform
the clip; then remove the bulb
from the housing.
! WARNING
Wait until the muffler cools to avoid
burns.
Headlight
12V/35W/35W
Taillight/Brakelight
12V/5W/21W
CAUTION
Use only specified bulbs indicated
in the chart as replacement bulbs.
! WARNING
Do not attempt to remove the bulb
when it is hot. Severe burns may
result.
