37
GENERAL
INF
O
RMA
T
IO
N
GENERAL INFORMATION
ATV IDENTIFICATION NUMBERS
The Arctic Cat ATV has two iden-
tification numbers: Vehicle Identi-
fication Number (VIN) and
Engine Serial Number (ESN).
The VIN is located on the hori-
zontal frame bar on the front
fender frame.
The ESN is located on the left-
side of the engine crankcase.
These numbers are required by the
dealer to complete warranty
claims properly. No warranty will
be allowed by Arctic Cat if the
VIN or ESN is removed or muti-
lated in any way.
Always provide the ATV name, VIN, and ESN when contacting
an authorized Arctic Cat ATV dealer for parts, service, accesso-
ries, or warranty. If a complete engine must be replaced, ask the
dealer to notify Arctic Cat for correct registration information.
IGNITION SWITCH
KEY
Two keys come with the ATV. Keep
the spare key in a safe place.
CONTROL LOCATIONS AND
FUNCTIONS
Ignition Switch
The ignition switch has two positions.
OFF
position — All electrical circuits
are off. The engine will not start. The
key can be removed in this position.
ON
position — The ignition circuit is
complete, the engine can run, and the
headlights and taillight are on. The key cannot be removed in this
position.
Hand Brakes
The hand brakes should be applied whenever a braking situation
is needed.
Apply the brakes by compressing the brake levers toward the han-
dlebar.
Brake Lever Lock
To engage and release a brake lever lock, use the following proce-
dure.
KM809A
KM037A
ATV-0055A
CAUTION
Leaving the ignition switch in the ON position for a long
period of time when the engine is not running may cause the
battery to discharge. Always leave the ignition switch in the
OFF position when engine is not running.
MD0010
Summary of Contents for ATV 2010
Page 66: ...64 MAINTENANCE RECORD DATE SERVICE PERFORMED NOTES...
Page 67: ...65 NOTES...
Page 69: ...67 NOTES...
Page 70: ...68 NOTES...
