Arctic Cat ATV 2010, Operator'S Manual

Page: 56 / 72

54
Brakelight
To replace the brakelight bulb, use the following procedure.
1. Remove the two screws and remove the lens cover.
2. Push the bulb in and turn it counterclockwise.
3. Install the new bulb by turning it clockwise while pushing in.
4. Install the lens cover.
FUSE
The main (7 amp) fuse is located
in a fuse holder near the battery
under the seat.

NOTE: To replace the fuse,
open the holder and remove
the fuse; then install the new
fuse. A spare fuse is located
within the holder.
If there is any type of electrical system failure, always check the
fuse first.
STORAGE COMPARTMENT/TOOLS
A basic tool kit is provided with
the ATV. It is located under the
seat.
Maintain the tool kit with the
ATV at all times.
CAUTION
When replacing the headlight bulb, be careful not to touch
the glass portion of the bulb. Grasp the new bulb with a
clean cloth.
CAUTION
Tighten the lens cover screws only until they are snug.
KM031A
CAUTION
Always replace a blown fuse with a fuse of the same type
and rating. If the new fuse blows after a short period of use,
consult an authorized Arctic Cat ATV dealer immediately.
KM029