manualshive.com logo in svg

Arctic Cat 2012 350 HS, Operator'S Manual, Page: 34 / 80

Share
Download
Arctic Cat 2012 350 HS Operator'S Manual Download Page 34

32

ATV Operation

Safe riding techniques include:

• Riding
• Leaning, Weight Shift, and Balance
• Wide  Turns
• Sharp  Turns
• Quick  Turns
• K-Turns
• Riding Uphill
• Riding Downhill
• Sidehilling/Traversing
• Swerving
• Crossing  Obstacles

Riding

Once the engine’s warm, the ATV is

ready to go.

ATV-0012

1. Keep your feet on the footrests and

both hands on the handlebar.

2. Hold the brake lever, and release the

brake lever lock.

3. Shift into gear.
4. Release the brake slowly and apply

the throttle.

Leaning, Weight Shift, 

and Balance

When you turn, the trick is to move for-

ward and slide over to the side of the seat

that’s on the inside of the turn. Support

your body weight on the outside footrest.

At the same time, lean your body to the

inside of the turn. Pay attention to the

handling—if you feel the tires coming off

the ground, reduce speed, shift more of

your body weight to the side that’s lift-

ing, and make the turn wider if possible.

ATV-0013

ATV-0024

ATV-0025

Wide Turns

About 20% of ATV accidents happen

during turns. If you don’t understand

turning techniques, it’s easy for the ATV

to get away from you by losing traction,

plowing, or tipping. Use this method for

wide turns:

ATV-0046

Summary of Contents for 2012 350 HS

















































































Reviews:

No comments