Arctic Cat 2010 1000 H2 TRV, Operator'S Manual, Page: 69 / 104

67
GENER
A
L MAINTENAN
CE
I=Inspect and clean, adjust, lubricate, replace as necessary
* = Dealer maintenance
T=Tighten R = Replace C = Clean
LIQUID COOLING
SYSTEM
(EFI Models)
The cooling system should be
inspected daily for leakage and dam-
age. If leakage or damage is detected,
take the ATV to an authorized Arctic
Cat ATV dealer for service. Also, the
coolant level should be checked peri-
odically.
MAINTENANCE SCHEDULE
Item Page
After
break-in
1 month 3 months 6 months
Battery 73 I I
* Engine nuts and bolts — I I
* Valve clearance — I I
Spark plug(s) 77 I I I
77 Replace every 18 months
Liquid cooling system 68 I I
Idle speed (400) 78 I
Throttle cable 78 I Inspect every time before riding
Gas/vent hoses 60 I Inspect every time before riding
60 Replace every 2 years
Engine/transmission oil and filter 70 R R
Air filter 78 I I C
Gear lubricant (Front differential -
rear drive) 70 I I
70 Replace every 4 years
V-Belt Cover 80 I I
Muffler/spark arrester 81 C
Tires/air pressure 80 I Inspect every time before riding
34-36 I Inspect every time before riding
* Brake components 71/72 I Inspect every time before riding
Brake fluid 71 I *Replace every 2 years
Brake hoses 72 I *Replace every 4 years
* Steering — I Inspect every time before riding
* Suspension (Ball joint boots,
drive axle boots front and rear, tie
rods, differential and rear drive
bellows) — I Inspect every time before riding
* Chassis nuts and bolts — I T
Frame/welds/racks — I I
Electrical connections — I I
Headlights/taillight-brakelight 82 I Inspect every time before riding