manualshive.com logo in svg

Arctic Cat 2010 1000 H2 TRV, Operator'S Manual

Share
Download
Arctic Cat 2010 1000 H2 TRV Operator'S Manual Download Page 56

54

Electric Starter Button

Pushing in on this button activates the

starter motor. Before starting the

engine, make sure the ignition switch is

in the ON position, the transmission is

in neutral, the reverse shift lever is in

the forward position, and the brake

lever lock is engaged.

NOTE: This ATV has safety inter-

lock switches which prevent the
starter motor from activating when
the transmission is not in neutral.
To start the ATV while in gear,
depress the auxiliary brake pedal
or compress the brake lever; then
depress the starter button.

Reverse Override 

Switch

This ATV is equipped with a reverse

speed limiter system. When additional

RPM is needed in reverse, depress and

hold the override switch.

NOTE: On the EFI models, the

override is active only when 4WD
is selected.

Throttle Lever

FI475B

Control engine RPM with the position

of the throttle lever. Operate this lever

with the thumb. Pushing it forward

increases engine RPM and allowing it

to retract decreases engine RPM.

Throttle Limiter Screw

Throttle lever travel may be limited by

adjusting the throttle limiter screw. The

throttle limiter should be adjusted

according to the operator’s skill and

experience. To adjust the throttle lim-

iter, use the following procedure.

1. Loosen the jam nut.

ATV-0053

2. Turn the throttle limiter screw

clockwise to decrease engine RPM

maximum or counterclockwise to

increase engine RPM maximum.

3. Tighten the jam nut securely.

NOTE: This ATV is equipped with

an RPM limiter that retards ignition
timing when maximum RPM is
approached. When the RPM lim-
iter is activated, it could be misin-
terpreted as a high-speed misfire.

Auxiliary Brake Pedal

CF223

! WARNING

Never activate the override switch
while the throttle is open as a loss
of control may result.

Summary of Contents for 2010 1000 H2 TRV









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands