83
9. Clean any dirt or debris from inside the air cleaner. Be sure
no dirt enters the carburetor.
10. Install the foam element into its frame; then place the
assembly into position in the housing.
11. Install the cover and secure with the retaining clips.
12. Install the seat making sure it is properly secured.
AIR FILTER HOUSING DRAIN TUBE
Periodically (weekly) check the
drain tube for gasoline or oil
accumulation. If noticed, remove
the drain tube cap from beneath
the housing, drain the gasoline or
oil into a suitable container, and
install and secure the tube cap.
DRIVE CHAIN CONDITION/ADJUSTMENT
Drive chain condition and adjustment should be inspected each day
before you ride. Always follow the guidelines below for inspecting and
servicing the drive chain.
Inspecting Condition
Inspect the drive chain for any of the following conditions.
• Loose
pins.
•
Loose or cracked rollers.
•
Dry or rusted links.
•
Kinked or binding links.
• Excessive
wear.
The presence of any of the conditions requires drive chain
replacement. Take the ATV to an authorized Arctic Cat ATV dealer for
this service.
Failure to inspect and maintain the drive chain can be hazardous.
Operating the ATV with the drive chain in poor condition or
improperly adjusted can cause an accident resulting in possible
injury.
! WARNING
GENERAL
MAINTENAN
CE
n
Note:
If the drive chain is worn or damaged, the sprockets may also be worn
or damaged. Inspect the sprockets for worn, broken, or damaged
teeth. Always inspect the sprockets when a new drive
chain is being installed.
