Left Hand Brake Lever
Compressing the left hand brake lever will apply the brake to the rear
wheels.
Brake Lever Lock
To engage and release the brake
lever lock, use the following pro-
cedure.
1. Move the brake lever lock to
the left side.
2. Release the brake lever lock by
moving the brake lever lock to
the right side.
Check to make sure the brake le-
ver lock engages properly and that
the brake (when engaged) locks
the rear wheels.
63
GENERAL
INFORMA
TION
KM131
KM130
Always check to be sure that the brake lever lock has been disen-
gaged before operating the ATV. An accident could result if the bra-
ke lever lock is left engaged while the ATV is operated. The brake
may relax if left engaged for a long period of time. This could cause
an accident; therefore, do not leave the ATV on a hill depending on
the brake lever lock. Always block the downhill side of the wheels if
leaving the ATV on a hill or park the ATV in a sidehill position.
! WARNING
n
Note:
The brake lever lock must lock the rear wheels. If it doesn’t, take the
ATV to an authorized Arctic Cat ATV dealer for service.
