5 First putting into operation
36
5
First putting into operation
5.1
Notes regarding first putting into operation
●
Ensure that all works of the delivery inspection have been carried out at an author-
ised Arctic Cat specialist repair shop.
●
Before the first ride, read the entire user manual carefully.
●
Enter de registration PIN (refer to section 5.2).
●
Make yourself familiar with the controls.
●
Observe the safety instructions.
●
Become accustomed to the handling of the vehicle on suitable terrain.
●
Do not go on off-road driving that is beyond your capabilities.
●
While driving, hold the handlebar with both hands.
●
While driving, keep your feet on the footrests.
●
Run the engine in (refer to section 5.3).
●
Run the brake pads in (refer to section 5.4).
5.2
Entering the registration PIN (POSR)
As soon as the vehicle has been completely registered (the vehicle check list must be
completed online), the 6 digit PIN is sent via e-mail.
After delivery, the gauge display will display one of the following codes: U1000 or
U1001. At the same time, all functions will be deactivated as long as the registration
PIN has not been entered. You can confirm the code with the "S" button. The code
will disappear until the next start.
During the first five operating hours after putting into operation, the vehicle will run
without restrictions and the code U1000 will be displayed. After five operating hours,
the code U1001 will appear and the speed will be limited to approximately 4,500 rev-
olutions per minute.
NOTE
This Arctic Cat vehicle is equipped with a software which requires entering
a 6 digit PIN (Personal Identification Number) at the time of registration.
NOTE
The "M" and "S" buttons can be arranged in a different way as shown in
Fig. 26.
