background image

 ARCOWELD LIMITED WARRANTY continued 

_____________________________________________________________________________________

 

The warranty is effective for the time stated below beginning on the date that the authorized distributor delivers the 

products to the Purchaser. Notwithstanding the foregoing, in no event shall the warranty period extend more than 

the time stated plus one year from the date Arcoweld delivered the product to the authorized distributor. Any claim 

under this warranty must be made within the warranty period which commences on the date of purchase of the 

product. To make a claim under the warranty, take the product (with proof of purchase from an Arcoweld 

Accredited Seller) to the store where you purchased the product or contact Arcoweld on + 61 8 9248 3188   for 

advice on your nearest Service Provider. Arcoweld reserves the right to request documented evidence of date of 

purchase. Arcoweld or our Accredited Distributor must be notified in writing of its claim within seven (7) days of 

becoming aware of the basis thereof, and at its own expense returning the goods which are the subject of the claim 

to Arcoweld or nominated Accredited Distributor/Accredited Service Provider.  

Email: 

info@arcoweld,com.au

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with 

guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or 

refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not 

amount to a major failure.  

Note: 

* No employee, agent, or representative of Arcoweld is authorized to change this warranty in any way or grant any

other warranty, and Arcoweld shall not be bound by any such attempt. Correction of nonconformities, in the

manner and time provided herein, constitutes fulfilment of Arcoweld’s obligations to purchaser with respect to the

product.

* This warranty is void, and seller bears no liability hereunder, if purchaser used replacement parts or accessories

which, in Arcoweld’s sole judgment, impaired the safety or performance of any Arcoweld product and if the unit is

altered or serviced by an unauthorised Arcoweld Service Provider. Purchaser’s rights under this warranty are void if

the product is sold to purchaser by unauthorized persons.

‘ARCOWELD’ relays to customers of its authorized distributors that its products will be free of defects in 

workmanship or material. Should any failure to conform to this warranty appear within the time period applicable 

to the Arcoweld products Arcoweld shall, upon notification thereof and substantiation that the product has been 

stored, installed, operated, and maintained in accordance with Arcoweld’s specifications, instructions, 

recommendations and recognized standard industry practice, and not subject to misuse, repair, neglect, alteration, 

or accident, correct such defects by suitable repair or replacement, at Arcoweld’s sole option, of any components or 

parts of the product determined by Arcoweld to be defective.  

Please note that the information detailed in this statement supersedes any prior published data produced by 

Arcoweld.  

12

 

Summary of Contents for ArcoCut G-40i

















Reviews: