6.
Connect Power (12 volt or 24 volt or solar) to the Primary operator and connect the
battery
7.
The Limit Switches may now be adjusted (See figure 5). Each of the Master and Slave
operators has its own pair of cams, one to set the open position and one to set the
closed position. Firstly mark the position of each cam as a reference. Loosen the
screw holding the cams. Operate the LI-2B operator with the transmitter and note
which cam controls opening and which cam operates the closing motion. (The cam
lobe activates a Limit Switch to turn off the motor). Reposition each cam and operate
the LI-2B again. Repeat until the gates open and close to the required positions.
8.
LI-2B Installation Manual
