Dear Installer/Owner
Congratulations on your purchase of the Australian Made Arco Pty. Ltd. Automatic Gate
Operator. The LI-2B gate operator is a breeze to install. It has been researched, designed
and manufactured by Arco Pty. Ltd. to be a reliable operator with almost non-existent
maintenance required.
To save you time and make installation easier, the LI-2B has a pre-wired control circuit
board and placed it under the cover with motor/gears etc. This means that you do not have
to spend time wiring up to a separate control box.
Circuitry for most options is already included. You simply have to connect up the external
devices. No extra boxes or cables are required.
The design features in the LI-2B gate operator will save you hours on site and the
installation will be neat and tidy.
Apart from the physical attributes the control circuit has some powerful operating features.
These can be adjusted on-site without modification to suit a range of situations.
This manual should answer most of your questions regarding the installation and operating
of the LI-2B gate operator. If further information is required, please contact us.
The Arco Pty. Ltd. LI-2B gate operator can be purchased as a single gate operator (primary),
which comes complete with the Logic Control Circuit board and can be installed on either
the left or right hand side. The dual set includes the above as well as a secondary (slave)
operator that does not have logic control.
LI-2B Installation Manual
