E-11
E-10
English
Connecting to an additional
power amplifier
The A39 provides a pair of unbalanced pre-outs on
standard RCA phono connectors, allowing connection
to an additional power amplifier to create a bi-amplified
setup. Most audio amplifiers, including the Arcam P49,
will connect to the pre amp outputs of the A39 using
standard interconnect cables.
Recording an audio source
The A39 allows you to record and monitor the sound
from any connected source.
The back panel
REC OUT
socket can be connected to the
input sockets of your recording device (these are usually
labelled
RECORD
or
IN
).
To record from a particular source, press the appropriate
source button (for example,
TUNER
).
Adjusting the balance
The balance setting allows you to increase the volume of
one channel (left or right) relative to the other. Altering
the balance may help to restore the stereo image for an
off-centre listening position.
Balance can be adjusted from the front panel or from the
remote control. Press the
BALANCE
button (or
BAL
on the
CR902) to view the current setting, then use the control
knob (or the
+/–
buttons on the remote) to change the
setting – from
L12
to
R12
, via the neutral value
0
.
Speaker Control
The SP1 and SP2 switches enable and disable the
respective speaker outputs. The LED will be lit if the
speakers are enabled.
Listening
Volume control
Use the control knob (or the
+/–
buttons on the remote)
to change the volume. Turn the knob clockwise to
increase the volume, anti-clockwise to reduce it.
Listening using headphones
The headphones socket (
PHONES
) accepts headphones
with an impedance rating between 16Ω and 2k
Ω
, fitted
with a 3.5 mm stereo jack plug.
The pre-amp outputs and speakers are muted when
headphones are plugged in and the front panel display
shows
Headphone
.
The headphones socket is always active, unless output
has been muted.
Muting output
The output of the A39 can be silenced by pressing
MUTE
on the front panel (or
-
on the remote control). If the
unit is muted, the power light changes to orange and
the source is shown on the front display panel (e.g.
PVR
MUTE
).
Press
MUTE/
-
for a second time (or change the volume)
to cancel mute.
A39
MUTE
DISPLAY
BALANCE
PHONO
AUX
CD
TUNER
SAT
BD
PVR
AV
SP1
SP2
AUX
PHONES
POWER
POWER / STANDBY
CR902 remote
control
The CR902 is pre-programmed for use with the
A39. Make sure the two AAA batteries supplied
are installed before attempting to use the remote
control.
A. With the CR902 remote face-down, press down
on the non-slip indentations of the battery
compartment cover and slide the cover off.
B. Insert the two ‘AAA’ batteries supplied. Take
care to insert the batteries in the right direction
by following the ‘
+
’ and ‘
–
’ marks in the battery
compartment.
C. Slide the battery compartment cover back and
lock it in place with a click.
The CR902 requires a clear line of sight to the front
panel display of A39 to ensure reliable operation.
AUDIO
SACD
MENU
FM MONO P/TUNE
STORE
INFO
BD
CR902
RTN