background image

E-15

E-14

English

software 

licencing

We protect your rights with two steps: (1) copyright the 

software, and (2) offer you this license which gives you legal 

permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make 

certain that everyone understands that there is no warranty for 

this free software. If the software is modified by someone else 

and passed on, we want its recipients to know that what they 

have is not the original, so that any problems introduced by 

others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software 

patents. We wish to avoid the danger that redistributors of a 

free program will individually obtain patent licenses, in effect 

making the program proprietary. To prevent this, we have made 

it clear that any patent must be licensed for everyone’s free use 

or not licensed at all. 
The precise terms and conditions for copying, distribution and 

modification follow.
TERMS AND CONDITIONS FOR COPYING, 

DISTRIBUTION AND MODIFICATION
This License applies to any program or other work which 

contains a notice placed by the copyright holder saying it may 

be distributed under the terms of this General Public License. 

The ‘Program’, below, refers to any such program or work, and 

a ‘work based on the Program’ means either the Program or 

any derivative work under copyright law: that is to say, a work 

containing the Program or a portion of it, either verbatim or 

with modifications and/or translated into another language. 

(Hereinafter, translation is included without limitation in the 

term ‘modification’.) Each licensee is addressed as ‘you’.
Activities other than copying, distribution and modification are 

not covered by this License; they are outside its scope. The act 

of running the Program is not restricted, and the output from 

the Program is covered only if its contents constitute a work 

based on the Program (independent of having been made by 

running the Program). Whether that is true depends on what 

the Program does.

ENGLISH
1.  You may copy and distribute verbatim copies of the Program’s 

source code as you receive it, in any medium, provided that 

you conspicuously and appropriately publish on each copy 

an appropriate copyright notice and disclaimer of warranty; 

keep intact all the notices that refer to this License and to 

the absence of any warranty; and give any other recipients 

of the Program a copy of this License along with the 

Program.
You may charge a fee for the physical act of transferring a 

copy, and you may at your option offer warranty protection 

in exchange for a fee.

2.  You may modify your copy or copies of the Program or any 

portion of it, thus forming a work based on the Program, 

and copy and distribute such modifications or work under 

the terms of Section 1 above, provided that you also meet 

all of these conditions:

a).  You must cause the modified files to carry prominent 

notices stating that you changed the files and the date of 

any change.

b).  You must cause any work that you distribute or publish, 

that in whole or in part contains or is derived from the 

Program or any part thereof, to be licensed as a whole at no 

charge to all third parties under the terms of this License.

c).  If the modified program normally reads commands 

interactively when run, you must cause it, when started 

running for such interactive use in the most ordinary 

way, to print or display an announcement including an 

appropriate copyright notice and a notice that there is 

no warranty (or else, saying that you provide a warranty) 

and that users may redistribute the program under these 

conditions, and telling the user how to view a copy of this 

License. (Exception: if the Program itself is interactive 

but does not normally print such an announcement, your 

work based on the Program is not required to print an 

announcement.)
These requirements apply to the modified work as a whole. 

If identifiable sections of that work are not derived from the 

Program, and can be reasonably considered independent 

and separate works in themselves, then this License, and its 

terms, do not apply to those sections when you distribute 

them as separate works. But when you distribute the same 

sections as part of a whole which is a work based on the 

Program, the distribution of the whole must be on the 

terms of this License, whose permissions for other licensees 

extend to the entire whole, and thus to each and every part 

regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or 

contest your rights to work written entirely by you; rather, 

the intent is to exercise the right to control the distribution 

of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based 

on the Program with the Program (or with a work based 

on the Program) on a volume of a storage or distribution 

medium does not bring the other work under the scope of 

this License.

3.  You may copy and distribute the Program (or a work based on 

it, under Section 2) in object code or executable form under 

the terms of Sections 1 and 2 above provided that you also 

do one of the following:

a).  Accompany it with the complete corresponding machine-

readable source code, which must be distributed under the 

terms of Sections 1 and 2 above on a medium customarily 

used for software interchange; or,

b).  Accompany it with a written offer, valid for at least three 

years, to give any third party, for a charge no more than 

your cost of physically performing source distribution, 

a complete machine-readable copy of the corresponding 

source code, to be distributed under the terms of Sections 

1 and 2 above on a medium customarily used for software 

interchange; or,

c).  Accompany it with the information you received as to 

the offer to distribute corresponding source code. (This 

alternative is allowed only for noncommercial distribution 

and only if you received the program in object code 

or executable form with such an offer, in accord with 

Subsection b above.)
The source code for a work means the preferred form of 

the work for making modifications to it. For an executable 

work, complete source code means all the source code 

for all modules it contains, plus any associated interface 

definition files, plus the scripts used to control compilation 

and installation of the executable. However, as a special 

exception, the source code distributed need not include 

anything that is normally distributed (in either source 

or binary form) with the major components (compiler, 

kernel, and so on) of the operating system on which the 

executable runs, unless that component itself accompanies 

the executable.
If distribution of executable or object code is made by 

offering access to copy from a designated place, then 

offering equivalent access to copy the source code from the 

same place counts as distribution of the source code, even 

though third parties are not compelled to copy the source 

along with the object code.

4.  You may not copy, modify, sublicense, or distribute the 

Program except as expressly provided under this License. 

Anyattempt otherwise to copy, modify, sublicense or 

distribute the Program is void, and will automatically 

terminate your rights under this License. However, parties 

who have received copies, or rights, from you under this 

License will not have their licenses terminated so long as 

such parties remain in full compliance.

5.  You are not required to accept this License, since you have not 

signed it. However, nothing else grants you permission to 

modify or distribute the Program or its derivative works. 

These actions are prohibited by law if you do not accept 

this License. Therefore, by modifying or distributing the 

Program (or any work based on the Program), you indicate 

your acceptance of this License to do so, and all its terms 

and conditions for copying, distributing or modifying the 

Program or works based on it.

6.  Each time you redistribute the Program (or any work based 

on the Program), the recipient automatically receives a 

license from the original licensor to copy, distribute or 

modify the Program subject to these terms and conditions. 

You may not impose any further restrictions on the 

recipients’ exercise of the rights granted herein. You are not 

responsible for enforcing compliance by third parties to 

this License.

7.  If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to 

patent issues), conditions are imposed on you (whether by 

court order, agreement or otherwise) that contradict the 

conditions of this License, they do not excuse you from the 

conditions of this License. If you cannot distribute so as to 

satisfy simultaneously your obligations under this License 

and any other pertinent obligations, then as a consequence 

you may not distribute the Program at all. For example, if a 

patent license would not permit royalty-free redistribution 

of the Program by all those who receive copies directly or 

indirectly through you, then the only way you could satisfy 

both it and this License would be to refrain entirely from 

distribution of the Program. If any portion of this section 

is held invalid or unenforceable under any particular 

circumstance, the balance of the section is intended to 

apply and the section as a whole is intended to apply in 

other circumstances. It is not the purpose of this section to 

induce you to infringe any patents or other property right 

claims or to contest validity of any such claims; this section 

has the sole purpose of protecting the integrity of the free 

software distribution system, which is implemented by 

public license practices. Many people have made generous 

contributions to the wide range of software distributed 

through that system in reliance on consistent application 

MPEG Layer-3 audio coding technology licensed from 

Fraunhofer IIS and Thomson.
Windows Media and the Windows logo are trademarks or 

registered trademarks of Microsoft Corporation in the United 

States and/or other countries.
This product uses some software programs which are listributed 

under the GPL license. Accordingly, the following GPL software 

source codes that have been used in this product can be 

provided after asking at http://www.sherwoodamerica.com.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of 

this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your 

freedom to share and change it. By contrast, the GNU General 

Public License is intended to guarantee your freedom to share 

and change free software--to make sure the software is free for 

all its users. This General Public License applies to most of the 

Free Software Foundation’s software and to any other program 

whose authors commit to using it. (Some other Free Software 

Foundation software is covered by the GNU Lesser General 

Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, 

not price. Our General Public Licenses are designed to make 

sure that you have the freedom to distribute copies of free 

software (and charge for this service if you wish), that you 

receive source code or can get it if you want it, that you can 

change the software or use pieces of it in new free programs; 

and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid 

anyone to deny you these rights or to ask you to surrender the 

rights. These restrictions translate to certain responsibilities for 

you if you distribute copies of the software, or if you modify 

it. For example, if you distribute copies of such a program, 

whether gratis or for a fee, you must give the recipients all the 

rights that you have. You must make sure that they, too, receive 

or can get the source code. And you must show them these 

terms so they know their rights.

of that system; it is up to the author/donor to decide if 

he or she is willing to distribute software through any 

other system and a licensee cannot impose that choice. 

This section is intended to make thoroughly clear what is 

believed to be a consequence of the rest of this License.

8.  If the distribution and/or use of the Program is restricted 

in certain countries either by patents or by copyrighted 

interfaces, the original copyright holder who places 

the Program under this License may add an explicit 

geographical distribution limitation excluding those 

countries, so that distribution is permitted only in or 

among countries not thus excluded. In such case, this 

License incorporates the limitation as if written in the body 

of this License.

9.  The Free Software Foundation may publish revised and/or new 

versions of the General Public License from time to time. 

Such new versions will be similar in spirit to the present 

version, but may differ in detail to address new problems 

or concerns. Each version is given a distinguishing version 

number. If the Program specifies a version number of this 

License which applies to it and ‘any later version’, you have 

the option of following the terms and conditions either of 

that version or of any later version published by the Free 

Software Foundation. If the Program does not specify 

a version number of this License, you may choose any 

version ever published by the Free Software Foundation.

10.  If you wish to incorporate parts of the Program into other 

free programs whose distribution conditions are different, 

write to the author to ask for permission. For software 

which is copyrighted by the Free Software Foundation, 

write to the Free Software Foundation; we sometimes make 

exceptions for this. Our decision will be guided by the two 

goals of preserving the free status of all derivatives of our 

free software and of promoting the sharing and reuse of 

software generally.

NO WARRANTY
11.  BECAUSE THE PROGRAM IS LICENSED FREE OF 

CHARGE, THERE IS NO WARRANTY FOR THE 

PROGRAM, TO THE EXTENT PERMITTED BY 

APPLICABLE LAW. EXCEPT WHEN OTHERWISE 

STATED IN WRITING THE COPYRIGHT HOLDERS 

AND/OR OTHER PARTIES PROVIDE THE PROGRAM 

‘AS IS’ WITHOUT WARRANTY OF ANY KIND, 

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT 

NOT LIMITED TO, THE IMPLIED WARRANTIES 

OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE. THE ENTIRE RISK AS 

TO THE QUALITY AND PERFORMANCE OF THE 

PROGRAM IS WITH YOU. SHOULD THE PROGRAM 

PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 

NECESSARY SERVICING, REPAIR OR CORRECTION.

12.  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW 

OR AGREED TO IN WRITING WILL ANY COPYRIGHT 

HOLDER, OR ANY OTHER PARTY WHO MAY 

MODIFY AND/OR REDISTRIBUTE THE PROGRAM 

AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES 

ARISING OUT OF THE USE OR INABILITY TO USE 

THE PROGRAM (INCLUDING BUT NOT LIMITED 

TO LOSS OF DATA OR DATA BEING RENDERED 

INACCURATE OR LOSSES SUSTAINED BY YOU OR 

THIRD PARTIES OR A FAILURE OF THE PROGRAM 

TO OPERATE WITH ANY OTHER PROGRAMS), EVEN 

IF SUCH HOLDER OR OTHER PARTY HAS BEEN 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the 

greatest possible use to the public, the best way to achieve this 

is to make it free software which everyone can redistribute and 

change under these terms.
To do so, attach the following notices to the program. It is safest 

to attach them to the start of each source file to most effectively 

convey the exclusion of warranty; and each file should have at 

least the ‘copyright’ line and a pointer to where the full notice 

is found.
One line to give the program’s name and a brief idea of what 

it does.
Copyright (C) <year><name of author>
This program is free software; you can redistribute it and/or 

modify it under the terms of the GNU General Public License 

as published by the Free Software Foundation; either version 2 

of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, 

but WITHOUT ANY WARRANTY; without even the implied 

warranty of MERCHANTABILITY or FITNESS FOR A 

PARTICULAR PURPOSE. See the GNU General Public 

License for more details.
You should have received a copy of the GNU General Public 

License along with this program; if not, write to the Free 

Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, 

MA 02111-1307 USA
Also add information on how to contact you by electronic and 

paper mail.
If the program is interactive, make it output a short notice like 

this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author 

Gnomovision comes with ABSOLUTELY NO WARRANTY; for 

details type ‘show w’. This is free software, and you are welcome 

to redistribute it under certain conditions; type ‘show c’ for 

details.
The hypothetical commands ‘show w’ and ‘show c’ should show 

the appropriate parts of the General Public License. Of course, 

the commands you use may be called something other than 

‘show w’ and ‘show c’; they could even be mouse-clicks or menu 

items--whatever suits your program.
You should also get your employer (if you work as a 

programmer) or your school, if any, to sign a ‘copyright 

disclaimer’ for the program, if necessary. Here is a sample; alter 

the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the 

program ‘Gnomovision’ (which makes passes at compilers)
written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating 

you program into proprietary programs. If your program is 

subroutine library, you may consider it more useful to permit 

linking proprietary applications with the library. If this is what 

you want to do,
use the GNU Library General Public License instead of this 
License.

Summary of Contents for CDS27






































































Reviews: