Arbor Technology ARTS-4770 User Manual Download Page 78

Page: 78 / 103

- 68 -

BIOS

5.1.2.10. F81216 Second Super IO Configuration

Use this submenu to enable/disable the computer’s serial ports 0~1.

The featured submenus are:

Submenu

Description

Serial Port 0

Configuration

Configures the computer’s Serial Port 0, which is fixed to RS232 and

cannot be changed. The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 1

Configuration

Configures the computer’s Serial Port 1, which is fixed to RS232 and

cannot be changed. The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

5.1.2.11. CPU PPM Configuration

Use this submenu to enable/disable the CPU PPM Turbo mode.

Submenu

Description

Turbo Mode

Enables/disables the CPU PPM Turbo Mode.

Enabled

is the default.

Summary of Contents for ARTS-4770








































































































Search results

Summary of Contents for ARTS-4770

Reviews:

Brands by name

Popular brands

Arbor Technology ARTS-4770, User Manual

Search results

Summary of Contents for ARTS-4770

Reviews:

Brands by name

Popular brands