Arbor Technology ARTS-4770 User Manual Download

Page: 12 / 103

- 2 -

Introduction

1.1. Product Highlights

•

Fanless and rugged design

•

Build-in Intel® Core™ i7-3517UE 1.7G Hz Processor

•

Wide Range DC Power Input (9~36V)

•

Support Smart Ignition for vehicle

•

Power on/off delay and low voltage

protection

•

4-channel POE

•

Mini PCIe expansion slots with 2*SIM

holders for LTE and HSUPA

•

Two Removable 2.5” SSD trays

•

12VDC output

1.2. About this Manual

This manual is meant for the experienced users and integrators with hardware knowledge

of personal computers. If you are not sure about the description herein, consult your

vendor before further handling.

We recommend that you keep one copy of this manual for the quick reference for any

necessary maintenance in the future. Thank you for choosing ARBOR products.

Summary of Contents for ARTS-4770








































































































Search results

Summary of Contents for ARTS-4770

Reviews:

Related manuals for ARTS-4770

Brands by name

Popular brands

Arbor Technology ARTS-4770, User Manual

Search results

Summary of Contents for ARTS-4770

Reviews:

Related manuals for ARTS-4770

Brands by name

Popular brands