ARANA FOGATTI FS06B1, Installation And Operating Instructions Manual

Page: 59 / 68

Make A Difference 卓 / 尔 / 不 / 凡
EN
59
Method #2：
7.4 Parts
Plug in electricity, it will show "O".
Press for 3 seconds,, it will show "PP".
Press to show FA; Press to show specifications: set the value to be 00. Press
to exit.
Press to show PH; Press to show PL. Then please turn on the gas and water.
Then water heater will run in minimun heat load.
After testing above, press to switch specifications like PL, DH, FH, FL......till it
shows "qu", then press to save and exit setting.
Set the temperature on wired controller to be 95 ℉，then if the water inlet
temperature is high enough to make outlet water temperature higher than 95 ℉ , it
proves that the water heater is running in its minimum heat load.
Lock
Gas control valve
Draught fan assembly
Burner
Parts Photo