4
English
Regent-X
TO OPEN/CLOSE SHIELD
To open, push the shield latch lever up and the shield will open slightly
①
. Then
pull the bulge on the shield slightly outward so the shield clears the latch post on
the helmet
②
, and raise the shield.
WARNING :
Do not attempt to open the shield without using the latch
system, or push down on the shield latch lever
③
, as damage to the latch
system may occur.
To close, push the shield down until the latch post fully engages the shield and
the latch lever captures the bottom of the shield
④
.
WARNING :
Be sure to latch the shield properly before riding. If not latched
securely, the shield may open unexpectedly from wind pressure, vibration
or even normal head movement.
If shield operation becomes stiff, flexing excessively as you raise or
lower it, apply one or two drops of supplied silicone lubricant around
sliding slot and brass stud, and wipe off with soft tissue paper for shield
operation maintenance. If shield is dirty, clean before applying silicone.
③
④
①
②
