76
USE
12.5
Spraying a field
Let us assume we want to spray a field
along parallel lines, but only once the
edges of the field have been sprayed.
Fig. 242
• Go the beginning of the field to be sprayed.
• Turn Delta 80 on (par. 7).
After self-diagnostics, Delta 80 displays the "Home"
screen (Fig. 242).
• Begin a new job, using the function
(par. 14.3).
• Enter spraying settings.
SPRAYING SETTINGS
Fig. 243
Fig. 244
Target rate
- Set the spray rate value for the treatment (Fig. 244).
Press
OK
to confirm the value.
Fig. 245
Fig. 246
Select nozzles config
- Select a nozzle configuration from the list (Fig. 246).
With this data indicate which nozzles are installed on the boom
spraying points (preset configurations in the
Spray spots
configurations
menu, par. 10.1.1).
- Press
OK
to confirm.
Fig. 247
Fig. 248
Map
If there is at least one map (on the internal memory), you can select
a prescription map for the spraying.
According to the position detected by the GPS receiver, Delta 80 will
use the appropriate spray rate for the area that is being sprayed
(par. 13.3 Importing and using a prescription map).
- Select a map from the list (Fig. 248).
- Press
OK
to confirm.
Fig. 249
Mark A ?
Fig. 250
Start job
- Select
and press
OK
to switch to guidance.
Fig. 251
• In the job menu, set the tank level with the function
(par. 15.3).
• Start spraying by acting on the main control valve switch.
• Start moving along the field perimeter.
