26
SETUP
"BASIC SETTINGS"
Fig. 58
- Select
Tractor
(Fig. 58) and press
OK
. Proceed to guided setup.
Tractor > Start
- Delta 80 guides you through the setup procedure: follow all suggested steps and select required
options.
OK
: next step
ESC
: previous step.
- When message
Press Ok to confirm selected settings
is displayed, setup is completed.
Press
OK
.
- Press
ESC
and return to the
Settings
menu.
Fig. 59
OK
Next step
ESC
Previous step
Fig. 60
BASIC TRACTOR SETTINGS
• AUTONOMOUS GUIDANCE
: control unit for automatic guidance.
GeoSteer
: control unit with built-in control unit.
ECU-S1
: ARAG control unit code 4679100
None
• GPS RECEIVER
A100
: ARAG receiver code 520100.693.
Smart-Ag / Smart 6
: ARAG receivers code 467016xx.
AgStar
: ARAG receivers code 467016xx.
NMEA
: all GPS receivers with NMEA183 protocol and with the following features:
- 10 Hz GGA message; latitude and longitude coordinates with at least 6 decimal digits.
- 10 Hz VTG message.
- 0.1 Hz ZDA message.
- Serial port 57600 bps, n, 8, 1.
Demo
: Delta 80 simulates guidance.
None
YOU COMPLETED BASIC SETUP FOR MACHINES WITH TOWED/3-POINT HITCH IMPLEMENT:
YOU CAN REPEAT THEM AT ANY TIME, BY REPEATING STEPS
1
,
2
,
3
AND
4B
.
NOW PROCEED TO ADVANCED SETUP DESCRIBED IN CHAP. 10.
> > > 4B - GUIDED SETUP PROCEDURE FOR MACHINES WITH TOWED / 3-POINT HITCH IMPLEMENT
Par.
Confirm access
or data change
Exit the function or
data change
Delete
selected
character
Scroll
(LEFT /
RIGHT)
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character
