ARAG DELTA 80, Installation, Use And Maintenance Manual

Page: 22 / 126

22
9 BASIC SETTINGS
FIRST SWITCH-ON - SETUP
If you have a setup file (Backup), duly stored in a pendrive, press
F4
(
A
in Fig. 38) and follow the procedure described under par. 14.4.2.
IN ANY OTHER CASE, PRESS
F7
( B ): SAVE USER AND MACHINE CONFIGURATION (STEPS 1 AND 2 );
START GUIDED SETUP PROCEDURE BY MEANS OF
F8
(STEP
3
).
PAR.
14.4.2
B
A
Fig. 38
ACTIVE SETTINGS AT END
OF GUIDED SETUP PROCEDURE
self-propelled
machine
machine
with towed/3-point hitch
implement
Fig. 39
1 CREATING A NEW USER
- Select
User
(Fig. 40): follow the suggested steps and select the required options (Fig. 41).
OK
: next step
ESC
: previous step.
- Type the name (Fig. 42) and press
OK
twice: new user is now active on the computer (
usr00
).
- Go to step
2
.
Fig. 40
OK
Next step
ESC
Previous step
Fig. 41 Fig. 42
2 SAVING THE MACHINE CONFIGURATION
- Select
Configuration
(Fig. 43): follow the suggested steps and select the required options (Fig. 44).
OK
: next step
ESC
: previous step.
- Type the name (Fig. 45) and press
OK
twice: machine configuration is now active on the computer.
"
macxx
"= self-propelled machines; or "
impxx
" and "
traxx
"= machines with towed or 3-point hitch implement ("
impxx
" for implement, "
traxx
" for the tractor).
- Go to step
3
.
Fig. 43
OK
Next step
ESC
Previous step
Fig. 44
or
Fig. 45
3 GUIDED SETUP PROCEDURE
- From the "Home" page (Fig. 46 or Fig. 47) press
F8
. You can do the following:
4A
SELF-PROPELLED MACHINE
page
23
Fig. 46
page
25
4B
MACHINE WITH TOWED/
3-POINT HITCH IMPLEMENT
Fig. 47
SETUP "BASIC SETTINGS"
x2
x2