87
14.3
F3
New job
Start a new spraying
1
Press
F3
to start a new spraying. If the current job has not been saved yet, Delta 80 will prompt the user to save it (Fig. 276).
Press
OK
to continue without saving (
2A
) or
ESC
to interrupt the procedure and save (
2B
).
1
2b
2a
Fig. 276
IF AT THIS STAGE YOU CHOOSE TO CONTINUE
WITHOUT SAVING (
2A
), ALL CURRENT JOB DATA WILL
BE LOST.
2B
The
ESC
key stops the beginning of a new job.
3B
Save the previous job with the function
Save job
(par. 14.2).
Now start from point
1
to begin a new spraying and pass directly to step
2A
.
3B
Fig. 277
2A
The
OK
key allows switching to the treatment start page without saving the job.
Fig. 278
Check the
Spraying settings
in Fig. 278;
change them if necessary.
"HOME" MENU - F3 NEW JOB
CONTINUES
Par.
Confirm access
or data change
Exit the function or
data change
Delete
selected
character
Scroll
(LEFT /
RIGHT)
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character
