Model 350AH1A
20
Rev B
2.6.6.3
Reset Faults
This will clear all faults, if possible.
Syntax:
RESET
Parameters:
None
Response Format:
None (No query for this command)
Example:
To clear any faults, send the following command:
RESET<LF>
2.6.6.4
Level Adjust
This command sets the RF Gain of the amplifier.
Syntax:
LEVEL:xy
Parameters:
Parameter(x):
GAIN
= RF Gain
Value(y):
For RF Gain:
0
= Minimum
100
= Maximum
Response Format:
None (No query for this command)
Example:
To set the amplifier to minimum RF Gain, send the following command:
LEVEL:GAIN0<LF>
To set the amplifier to 50% RF Gain, send the following command:
LEVEL:GAIN50<LF>
2.6.6.5
Identity
Query to identify the amplifier:
Syntax:
*IDN?
Parameters:
None
Query only (always requires a ? character)
Response Format:
f,m,n,<LF>
Where:
f
= manufacturer
m
= model designation
n
= firmware revision
Summary of Contents for 350AH1A
