AR 10044005, Operating And Service Manual

Page: 32 / 72

Model 5000A225A
18 Rev B
2.4.1.5.9 RS-232/Fiber-Optic Serial Baud Rate Screen
The RS-232/Fiber-Optic Serial Baud Rate screen is used to select the baud rate used by both the RS-232 port
and the Fiber-Optic Serial port. A thin black outline indicates the present baud rate selection. When the back
button is pushed the baud rate selection is stored to non-volatile memory. Therefore, if power is lost prior to
hitting the back button any baud rate selection changes will be lost. The default baud rate is 19200.
Figure 2-14. RS-232/Fiber-Optic Serial Baud Rate Screen
2.4.1.5.10 Key Beep Screen
The Key Beep screen allows the user to turn on or off the audible beep that occurs when a valid touch event
takes place. This setting is only stored in volatile memory and will be lost when power to the unit is cycled.
The default value for this setting is On.
Figure 2-15. Key Beep Screen