AR 10044005, Operating And Service Manual

Page: 31 / 72

Model 5000A225A
Rev B 17
2.4.1.5.7 I/O Screen
The I/O screen is used to present the user with menu options pertaining to the remote I/O ports found on the
rear of the unit and the interaction with the touch screen. These options include the GPIB address, RS-
232/Fiber-Optic Serial Baud Rate, and key beep.
Figure 2-12. I/O Screen
2.4.1.5.8 GPIB Address Screen
The GPIB address screen is used to select the GPIB address. Touching any of the buttons labeled 1 to 30
immediately sets the GPIB address to the corresponding value. A thin black outline indicates the present
GPIB address selection. When the back button is pushed the address selection is stored to non-volatile
memory. Therefore, if power is lost prior to hitting the back button any address selection changes will be lost.
The default GPIB address is 1.
Figure 2-13. GPIB Address Screen