■
Adding/Deleting Recipients
■
Adding a recipient
1
E-mail create screen
→
Select “ ” for empty
address entry field
→
k
.
A menu for selecting a recipient entry method is displayed. Refer
to step
3
of “Sending E-mail”.
You can also add recipients by entering them directly in the
address entry field.
■
Deleting a recipient
1
E-mail create screen
→
Select “ ” for recipient to
delete
→
k
→
[Delete].
◎
You can change the recipient type by selecting “
”
→
k
. You
cannot change the recipient type for the topmost recipient.
Receiving E-mail
1
Receive E-mail.
Once an e-mail is received, you are notified of the new mail in the
following ways.
•
is displayed in the status bar, and the ringtone sounds.
•
The e-mail address, name, and subject are displayed in the
status bar. If a sender designation is set for the received e-mail,
the set name is displayed. If the e-mail address is registered in
the contacts, the registered name takes priority.
•
The charging/incoming indicator flashes blue.
•
If the product is folded,
is displayed in the sub-display.
2
When the standby screen is displayed, press
j
→
[Inbox].
The e-mail list is displayed.
3
Select a received e-mail
→
k
.
The e-mail message is displayed.
◎
E-mail is received in the background even while using e-mail or
other functions.
is displayed in the status bar and a ringtone
sounds. However, e-mail is not received in the background if
“Auto-receive” is disabled.
◎
If “Auto-recieve” is disabled or there is a receive failure, a
ringtone sounds and
is displayed. Use “Mail check” to
receive the e-mail.
◎
Packet fees may be incurred even if mail is not properly received
due to reception conditions or the data being received.
◎
The maximum size of mail text that can be received is 1 MB per
e-mail. If a mail text exceeds that, a message appears at the end
of the received portion indicating that it is truncated.
◎
Received e-mail may not be correctly displayed depending on
the content of the mail.
62
