Phone
◎
If you add “184” before the Japan emergency call number
110/119/118, the emergency call responding agency will not be
notified of your location and phone number.
◎
VoLTE (LTE network) by au is used when connecting with
emergency organizations within Japan. You cannot connect
using 3G (circuit-switched network).
◎
In places where signal reception from GPS satellites or a base
station is relatively poor, such as in an underground mall, inside
a building or behind a tall building, the emergency call receiving
agency may be notified of some other place different from your
actual location.
◎
When GPS cannot be used to notify of your location, base station
signal is used instead.
◎
When making an emergency call to Police, Fire and Ambulance
or Regional Coast Guard Headquarters, always confirm where
you are, and tell them your exact location on the phone. Note that
depending on the area where you are calling, your call may not
be connected to the agency having jurisdiction over that area.
◎
If the emergency call receiving agency determines that human
lives and health are in danger, they will be able to acquire the
caller’s location information during the call or within a certain
period of time after the call.
■
Using P (Pause) Dialing and Making a Call
Enter the push signals to send beforehand and then select “Yes”
during the call to send the push signals. This is a convenient feature
when using information services and automatic reservation services.
Example: To dial “03-0001-XXXX (bank phone number)” and send
the branch “22X” and the account “123XX”
1
Enter bank phone number “030001XXXX”.
2
k
(Call etc)
→
[Add Prefix]
→
[Add P]
→
Enter the
branch “22X”.
3
k
(Call etc)
→
[Add Prefix]
→
[Add P]
→
Enter the
account “123XX”.
You can enter P (pause) between numbers to enter several push
signals at the same time.
4
m
→
[Yes]
→
[Yes].
After dialing, a confirmation screen is displayed. Confirm that the
destination has answered the call and then select “Yes”. A push
signal is sent each time you select “Yes” and press
k
.
Using Call Histories and Making a Call
1
When the standby screen is displayed, press
f
(Outgoing)/
s
(Incoming).
Press
x
to toggle the outgoing and incoming call histories.
2
Select contact to call from history
→
k
.
The outgoing/incoming call history details screen is displayed.
•
When a history with the number of outgoing/incoming calls
displayed is selected and
o
(Switch) is pressed, collected
outgoing/incoming call history information is displayed.
3
m
.
You can also dial by selecting the contact in the outgoing/
incoming call history list and pressing
m
.
◎
Up to 100 calls can be saved in the outgoing/incoming call
histories. Once more than 100 calls are made/received, calls are
deleted starting with the oldest. The number of calls that can be
saved may be fewer depending on available memory.
50
