27
When not in use for weeks3, after a transport,
or for still-keeping, remove the laboratory
water (see page 26) without refilling it. Then
remove the front cover, remove the rear hose
from the blue drain valve and connect a
sufficiently long drain hose. Now open the blue
valve and wait until all the water has drained
out. Finally, turn the blue valve off again, put
the original hose back in and turn it on again.
Finally, press the
front panel back into
its holder.
Before restarting,
carry out the
activation process
again.
Technical data
Manufacturer /
Importer:
Aquacentrum for Aquavolta®
,
Germany
Model
Aquavolta® Monmi Tec
HIM. Hydrogen-water
infusion machine
Dimensions
38,5 x x28,4 cm13,5
Filter performance
Without built-in water filter. Can
be operated with tap water,
filtered water, reverse osmosis
water or drinking water from
drinking water gallons (self-
priming).
Weight unit
4,8 kg
Current data
External V 24/ A 4DC power supply.
250 W (maximum) / 220-240 V AC
Water pressure
range/flow rate
0,5 - kg/cm/16
2
-3 litres per minute
H-
2
Enrichment method
Gas production by PEM
electrolysis process. Gas-
/Water injection mixing system
without electrode contact with the
Hydrogen concentration Water. Maximum mixing pressure < 5
ns
performanc
e germ
protection
bar.
►
3 mg/l/hour
►
UV-C lamp
Summary of Contents for Monmi-Tec HIM 3.0 ppm
Page 11: ...11 Nameplate Rear wall mounting...
Page 23: ...22 Setting the time...
