13
Transport protection
plug
1. The inlets/outlets for the water are closed with plugs.
The example drawings below show how this plugging
technique works.
2. To do this, press down the ring marked PUSH on the schematic drawing while simultaneously pulling on the
inserted tube or plug PULL.
3. With a little skill, you can do it with your fingers. If necessary, use a small open-ended spanner or a
fondue fork.
Please keep the stoppers.
4. When you want to put the plugs back in: Simply push them in.
5. You can make the hose connections in the same way by pressing them in and, if necessary, loosen them
again. Note: To loosen the hose connections, they must not be under water pressure.
Handling the connectors, plugs and quick couplings
Summary of Contents for Monmi-Tec HIM 3.0 ppm
Page 11: ...11 Nameplate Rear wall mounting...
Page 23: ...22 Setting the time...
