23
Initialisation is only necessary for the first activation
1. Venting: Press the right button briefly:
-> Water comes out of the tap
2. Press and hold the left button until
HHH is displayed.
3. In the next few hours3,5, the display shows the
symbols shown below in the order PCHCH.
4. At the end of the process, the time is
displayed again.
5. If interrupted, the procedure must be
repeated.
Initialisation of the system (duration hours3,5)
Summary of Contents for Monmi-Tec HIM 3.0 ppm
Page 11: ...11 Nameplate Rear wall mounting...
Page 23: ...22 Setting the time...
