17
5
6
6
7
The steps1 - 3correspond to the procedure on
the previous page.
4. If your tap also has a hot water connection,
you must unscrew it from the associated angle
valve in the same way.
5. Now unscrew the holder of the water tap
under the sink and remove the tap with
supply hose/hoses.
6. Guide the ¼" hose from the outside to the
inside through the hole in the mounting ring
(seal facing down!) under the sink and place the
tap on the mounting ring.
7. Now reattach the tap.
Please carry out the further steps in the same
way as the steps 3-5 on the previous page.
Do not forget to reconnect the hot water hose to
its angle valve.
The annoying drilling through the sink is no
longer necessary.
Video: https://www.youtube.com/watch?v=lg7nOM5yTYE
5
4
Mounting C: On the angle valve with mounting ring (installer)
Summary of Contents for Monmi-Tec HIM 3.0 ppm
Page 11: ...11 Nameplate Rear wall mounting...
Page 23: ...22 Setting the time...
