AquaSure HARMONY Series, Owner'S Manual

Page: 20 / 36

17
www.AQUASURE USA .com
Tel: 1-800-661-0680
Press the ENTER button
to accept and continue.
Press UP or DOWN buttons
to change units.
Setting 3 - Unit Capacity (Not shown if Timer Mode was selected in 2nd Step)
Set Unit Measurement - Gallons, Liters or Cubic Meters
(Recommend setting to Gallons for US Customer)
Gallons
(Recommended)
Liters Cubic Meters
Press the ENTER key to adjust the
unit capacity setting.
IMPORTANT! This setting will only appear if the either (
M
) Meter or (
tM
) Time Meter mode from
the previous setting was selected. User will not see this setting if (
t
) Timer mode was selected.
The system default is 1000 gallons with the option to change the unit measurement and the
capacity of the water treated before the system goes through a regeneration. It is recommended
to set the unit of measurement at (
gAL
) gallons and also calculate the correct amount of gallons
the system can treat by going through the worksheet on page 21 of owner’s manual or by
visiting our website
https://aquasureusa.com/calculationtool
Press the ENTER button
to accept, and the number
to the
left flashes.
Press UP or DOWN buttons
to set water capacity.
L M3
gAL
Flashing
SEt- 3 C-U
11 : 30
Flashing
01000 gAL
11 : 30
Flashing
5 4 3 2 1
01000 gAL
11
:
30