AquaSure HARMONY Series, Owner'S Manual

Page: 21 / 36

18
AQUASURE HARMONY SERIES
IMPORTANT! You may hit the button to exit to the main menu after setting up the gallons
needed for regeneration. Settings 5 - 8 have been preset from the factory and are only meant for
special applications that require customized settings. Consult your Aquasure Support Team for
further guidance if needed. 800-661-0680
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Use UP and DOWN
buttons to adjust
Hours Override.
Use UP and DOWN
buttons to adjust the
Regeneration Time.
Use UP and DOWN
buttons to adjust
Hours Override.
Press the ENTER
button to accept and
continue. Press the ENTER
button to accept and
continue.
Default: 2:00 a.m. – 072 hours
Hours Override range:
Every 24 hours (24, 48, 72… 960)
Default: 2:00 a.m. – OFF
Hours Override range:
Every 24 hours (24, 48, 72… 960)
4. Regeneration Time and Hours Override
(
t
) Time Mode
(
M
) Meter or (
tM
) Time Meter Mode
Press ENTER to go to
Hours Override. Press ENTER to go to
Hours Override.
IMPORTANT! Depending on the mode selected, the default setting may be set to regenerate at
every 72 hours. Even if (
M
) Meter or (
tM
) Time Meter mode is selected, the regeneration override
will still allow the system to regenerate even if the gallons didn’t count down to zero. It is highly
recommended to keep the setting at OFF if (
M
) Meter or (
tM
) Time Meter mode was selected.
Press the ENTER Key to adjust the
time and hour override setting.
Use UP and DOWN
buttons to adjust the
Regeneration Time.
SEt- 4 t-h
11 : 30
02 h-072
11
:
30
13 h-072
11 : 30
13 h-072
11 : 30
13 h-060
11
:
30
02 h-0ff
11
:
30
02 h-0ff
11 : 30
02 H-024
11 : 30