AquaSure HARMONY Series, Owner'S Manual

Page: 13 / 36

10
AQUASURE HARMONY SERIES
2.
Push the brine line into the brine
line connector and make sure it goes
through the o-ring. Secure by pushing
in the locking clip. Pull the brine line to
see if it is secure.
1.
Connect the brine line to the control
valve by removing the blue locking clip
on the brine line connector.
IMPORTANT! Make sure the brine line is secure to the connection provided on the brine tank. If
the brine line is not secure and sealed, it may not be able to perform a proper system regeneration
when needed, and can potentially cause overfill in the brine tank and result in leaks.
STEP 4. Connecting the Brine Tank
3.
Your brine tank system is 90% pre-assembled. To
finish the setup, unscrew and remove the black nut
on the connection protruding from the brine well.
4.
Rotate the brine well and insert the connection
through the upper hole in the brine tank.
5.
Re-screw the black nut onto the connection on the
outside of the brine tank so that it is snug.
6. Please ensure that your brine hose is thoroughly
connected at the brine tank fitting. The hose
should be fully seated into both ends of the quick
connection.
7.
Pour in 80 lbs (two bags) of course grade salt and
5 gallons of tap water into the brine tank.
3
4
5
6