7
AQUASURE
HARMONY SERIES
STEP 4.
Softener Preparation
1. Remove the resin tank from carton
2. Lubricate both O-rings on the bottom of the
control valve (center and outer).
4. Install the upper basket on the
bottom of the valve by lining up the
tabs, pressing in, then turning the
basket counterclockwise to lock it
in place.
5. Place the upper basket over the
distributor tube and push the valve
on the tank. Thread the valve on
the tank by turning it clockwise.
Be sure not to cross-thread the
valve on the tank. The valve should
thread easily in the tank. If not, it
may be cross-threaded.
3. Lubricate the riser tube located on
the opening of the tank.
6.
Tighten the valve hand tight, then
snug it further by tapping it with
the palm of the hand. DO NOT
use tools to tighten the valve or
damage could occur.
