6
www.
AQUASURE
USA
.com
Tel: 1-800-661-0680
2. Attached the other end of the
bypass valve onto the control
head and secure it with the metal
plate. Make sure the o-rings are
lubricated before installing.
STEP 3.
Brine Tank Preparation
(Skip this step if the brine tank comes preassembled)
1. Attach the four grid plate stand onto each
corner of the grid plate.
2. Place the grid plate inside the bottom of
brine tank, and brine well cut out on the
same side of the brine well holder mount
opening.
3. Place the brine well inside the brine tank
by sliding it into the grid plate. Make sure
the side with the slot cut out is facing
downward.
