Aquaread BlackBox, Instruction Manual

Page: 69 / 71

Aquaread BlackBox™ Instruction Manual 10401-00618 Rev P
13 0x000C Electrical resistivity
(Ω·cm) – lower 16
bits AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
14 0x000D Salinity (PSU × 100) AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
15 0x000E Total dissolved
solids (mg/L)– upper
16 bits AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
16 0x000F Total dissolved
solids (mg/L) – lower
16 bits AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
17 0x0010 Specific seawater
gravity (σ
t
× 10)
AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
18 0x0011 Dissolved oxygen
(mg/L × 100) AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
19 0x0012 Dissolved oxygen
(% air saturation ×
10) AP-300, AP-500, AP-600, AP-700,
AP-800, AP-900, AP-1000, AquaPlus,
AP-2000, AP-5000, AP-7000
20 0x0013 Probe depth (cm) All probes with depth sensor fitted
21 0x0014 AUX1 measurement
– upper 16 bits AP-800 † , AP-2000, AP-Lite,AP-5000, AP-
7000
22 0x0015 AUX1 measurement
– lower 16 bits AP-800 † , AP-2000, AP-Lite, AP-5000,
AP-7000
23 0x0016 AUX2 measurement
– upper 16 bits AP-2000, AP-5000, AP-7000
24 0x0017 AUX2 measurement
– lower 16 bits AP-2000, AP-5000, AP-7000
25 0x0018 AUX3 measurement
– upper 16 bits AP-5000, AP-7000
26 0x0019 AUX3 measurement
– lower 16 bits AP-5000, AP-7000
27 0x001A AUX4 measurement
– upper 16 bits AP-5000, AP-7000
28 0x001B AUX4 measurement
– lower 16 bits AP-5000, AP-7000
29 0x001C AUX5 measurement
– upper 16 bits AP-7000
30 0x001D AUX5 measurement
– lower 16 bits AP-7000
31 0x001E AUX6 measurement
– upper 16 bits AP-7000
32 0x001F AUX6 measurement
– lower 16 bits AP-7000
33 0x0020 Ammonia
concentration (mg/L
x 100) – upper 16
bits AP-2000, AP-5000, AP-7000
(if ammonium electrode fitted)
34 0x0021 Ammonia
concentration (mg/L
x 100) – lower 16
bits AP-2000, AP-5000, AP-7000
(if ammonium electrode fitted)
Modbus Input Registers
* AP-800 running software version 3.53 or below. † AP-800 running software version 4.00 or above
All measurement values are two's complement numbers (i.e. top bit set to represent a
negative value). Any AUX values that are invalid will be returned as 0x80000000.
All AUX electrode measurement values are output at the measured value x 100.
© 2019 Aquaread Ltd. www.aquaread.com Page 69 of 71