AquaTelemetry Instruction Manual
10401-01193 Rev H
6.3. Clearing the AquaTelemetry Memory
The memory in the AquaTelemetry unit is capable of storing up to 53,000 sets of readings.
At a logging rate of once / hour, this amounts to over six years worth of data. When the
memory becomes full, it will wrap around and start overwriting the oldest data.
Whilst the AquaTelemetry unit will only send data logged since the last upload when it
uploads data by email, if you upload data using the PC utility, it will upload the entire
AquaTelemetry memory, which could be a great deal of data.
The memory should be cleared periodically in order to keep the logged data a manageable
size.
In order to clear the memory, send the following message to the AquaTelemetry unit as an
SMS.
CLEAR MEMORY NOW
To prevent accidental memory clearing, this message will only be accepted if it is sent in its
entirety as shown above.
The AquaTelemetry unit will reply with a confirmation SMS showing:
SITE=XXXXXXXXXXXXXXXX
MEMORY CLEARED
7. DECLARATION OF CONFORMITY
Aquaread
®
Ltd declares that the equipment described herein is in compliance with the
essential requirements and other relevant provisions of Directives
2004/108/EC and
1999/5/EC.
© 2020 Aquaread
®
Ltd.
www.aquaread.com
Page 30 of 34