AquaTelemetry Instruction Manual
10401-01193 Rev H
2.14. AquaTelemetry Setup Screen Overview
The AquaTelemetry Setup screen allows you to setup the following parameters:
•
The AquaTelemetry unit's real time clock
•
An email account for data uploads
•
A mobile internet access point
•
Up to fifteen email addresses
•
Up to fifty SMS numbers
In addition, the software allows you to download logged data directly from the
AquaTelemetry unit and save that data to a file on your PC.
2.14.1. On Screen Help
Help has been provided in this software in the form of ‘Tool Tips’. If you want to know what
a control button does or what a data box displays, simply move your mouse pointer over
the item in question. A Tool Tip will appear after a few seconds to give you more
information.
2.15. Initiating PC Mode
To initiate PC mode on the AquaTelemetry unit, ensure the batteries are fitted and the
yellow LED is giving a single flash every five seconds (i.e. the unit is in standby mode).
Press and hold
the 'Push to Test' button beside the USB cable
connector until the Green LED lights up and starts to flash. Now,
within 30 seconds, click the 'Connect' button located on the left of the
PC screen just below the Setup Instructions.
The following warning box will appear to remind you to put the AquaTelemetry unit into PC
mode.
Click on OK. The PC will communicate with the AquaTelemetry unit and display the
AquaTelemetry unit's live clock data in the AquaTelemetry Clock window on the right hand
side of the screen. In addition, if the AquaTelemetry unit has been previously set up, the
email and phone book settings currently held in the unit will be displayed.
To change any AquaTelemetry settings, enter the revised setting into the relevant box in
the 'User Setting Input' column, then click the relevant button to transfer the data to the
AquaTelemetry unit.
© 2020 Aquaread
®
Ltd.
www.aquaread.com
Page 11 of 34
