Aqualytic SD 310 Oxi, Instruction Manual

Page: 56 / 200

56 SD_310_2 07/2018
18. Return and disposal
18.1 Return
All devices which are sent back to the manufacturer must be free from sample
remains and/or other harmful substances. Sample remains on the housing or on
the sensor can endanger persons or the environment.
Use suitable transport packaging for the return of the device, especially if it is still a
functioning device. Make sure that the device is protected with sufficient insulating
material in the packaging.
18.2 Disposal
Drop off the depleted batteries at a collection center designated for this purpose.
The device may not be disposed of with the household waste. If the device should be disposed
of, send it directly to us (with sufficient postage paid). We will dispose of the device properly
and in an environmentally friendly manner.
19. Technical data
Measurement
ranges O
2
concentration 0.00 - 70.00 mg/l
or ppm
O
2
saturation
0.0 - 600,0 % O
2
O
2
partial pressure 0 - 1200 hPa
O2 (0,0 - 427.5
mmHg)“
Sensor
temperature
-5.0 - 50.0 °C
NTC 10k (integr. in sensor)
Ambient pressure 10 - 1200 hPa
abs. Integr. pressure sensor
Precision
Nominal
temperature,
1000 hPa abs. Oxygen
±1.5 % from measurement value ±0.2 mg/l (0-25
mg/l)
or ±2.5 % from measurement value ±0.3 mg/l
(25-70 mg/l)
Sensor
temperature ± 0.1 °C
Precision Ambient pressure 3 hPa or 0.1% of meas. (higher applicable)
Working
conditions Sensor 0 - 40 °C / device -25 - 50°C; 0 - 95 % r.h.
(non condensing)
Nominal
temperature 25°C
Storage
temperature Sensor 0 - 40 °C / device -25 - 70 °C
Connections O
2
& temperature 7-pin bayonet connection
Ambient pressure Universal pressure joints for hoses with 4 and 6 mm
inside Ø
Interface / ext.
Supply
4-pin bayonet connection for interface and supply
(USB adapter USB 5100), analog output 0-1V,
adjustable
i
!