Rise Digital Bath
installation instuctions
page 12
Step-by-step instructions
Bath overflow filler
This product must be installed by a competent person in accordance with the
current Water Supply Regulations.
If an alternative bath outlet or bath spout with hand shower combination is
used, due to the restrictive characteristics of some of these products, outlet
flow rate may be affected. Aqualisa Products Ltd cannot guarantee outlet flow
rate if an alternative outlet solution is used. Please refer to the manufacturer’s
installation guide for full fitting instructions.
Aqualisa Products Limited reserves the right to revoke the guarantee if
an overhead shower kit system is fitted with a bath controller.
!
The bath overflow filler is suitable for baths up to a maximum thickness
of 24mm.
!
Carefully unscrew and remove the overflow filler
outlet from the body assembly and set aside.
1
Carefully unscrew and remove the bath waste
clicker assembly from the waste body and set
aside.
2
Offer the bath waste into position ensuring the
rubber washer is correctly aligned between the
waste assembly and the bath base.
3
Ensuring the rubber washer is correctly aligned,
pass the bath waste clicker through the bath
and secure to the waste body assembly.
4
