Rise Digital Bath
installation instuctions
page 15
Digital bath controller user guide
1. Turn the temperature dial to the required setting.
2. Press the ‘start/stop’ button on the control.
3. The LED display will flash until the selected temperature has been reached
and will then remain constant.
4. The temperature may be adjusted once the Digital bath is in use.
5. Press the ‘start/stop’ button to stop the bath filling when at the desired depth.
N.B. The bath fill can be stopped at any time by pressing the ‘start/stop’ button.
Bath ‘Top up’
Rise Digital Bath features a ‘Top up’ button wich provides a method of topping
up your bath at the desired temperature at a minimum flow rate. To operate the
bath in ‘Top up’ mode:
1. Turn the temperature dial to the required setting.
2. Press the ‘Top Up’ button to begin topping up
the bath. The bath will run for 1 minute
before stopping automatically.
N.B. The bath fill can be stopped at any time by
pressing the ‘start/stop’ button.
Bath overflow filler user guide
1. Push the waste cover to engage the plug fitting.
2. Push the waste cover again to disengage the
plug fitting.
Cleaning
Your Rise Digital Bath system should be cleaned using only a soft cloth and
washing-up liquid.
DO NOT USE ABRASIVE CLEANERS
