Aqualisa Colt, Installation Manual

Page: 17 / 25

6
Refit the wall outlet coverplate.
7
Drill and plug two holes 642mm-655mm vertically apart using a spirit level to
facilitate if necessary. Fit the rail end clip into position and loosely fit the lower
bracket into position.
8
Pass the rail through the handset holder whilst keeping the slider levers depressed
with the handset holder pointing in a downward direction.
9
If the soapdish is required slide onto the rail under the handset holder.
10
Current water supply regulations state the handset should not be allowed to pass a point 25mm above
the spill over level of the bath or shower tray. If this cannot be achieved, the hose restraint must be fitted.
This is fitted to the rail under the soapdish.
11
Fit the rail into the rail end bodies taking care to engage the location slot onto the lugs.
12
Fit the rail end clip fitting into position into the top rail end body and secure the rail
assembly to wall using the screws provided ensuring the rail and rail end bodies
remain firmly engaged.
13
Place the rail end covers into position and push firmly into place.
17
Colt installation guide:Dolphin install Guide 14/1/11 11:18 Page 17