Aqualisa Colt, Installation Manual

Page: 15 / 25

15
9
Refit the lower shroud by locating the lugs into the back plate and move the
shroud into position. Align the fixing screws with the screw holes, and fix into
place ensuring not to overtighten the fixing screws.
10
The installation may now be checked for leaks. Turn the on/off knob (left hand knob) fully forwards to
ensure the valve is fully turned off. Attach the shower hose to the
⁄÷™
” BSP outlet on the underside of the
valve to allow the water to discharge safely to waste.
11
Turn on the supplies and check for any leaks upstream of the valve. Slowly open the
on/off control and check for leaks downstream of the valve. If all is sound, turn off
the on/off knob fully and turn off the supplies.
12
Refit the upper shroud assembly by locating the lugs into the back plate and moving the shroud down
into position. Fix using the centrally located locking screw taking care not to overtighten.
13
Remove the paper backing from the badge and push firmly into position in the
recess in the shroud assembly.
Please refer to page 16 to 18 for shower head installation instructions.
Colt installation guide:Dolphin install Guide 14/1/11 11:17 Page 15