Aquaglide LUGEWAY 20 Owner'S Manual Download Page 7

www.aquaglide.com

7

1. Locate a flat, dry area with access to outlet for electrical pump.  The best setup position 

will also make launching easy. Never drag product as damage may occur. 

2. Unfold product completely and locate Main Valve [1]. To help future storage, closely note 

original folding & packaging method. Remove valve cap and confirm valve is in inflate (1-way 

airflow) position.

3. Insert air pump hose with proper valve fitting into Main Valve [1], lock into place. Use 

pump to inflate Main Valve [1] to Working Pressure as shown in Chart 1. Check for proper 

pressure using gauge (manometer).  Replace valve cap.

4. Repeat step 3 instructions to inflate each chamber to proper Working Pressure shown in 

Chart 1 until all chambers are properly inflated.

5. Confirm that suitable anchor(s) and mooring lines are in place before launching this item 

(see Anchoring).

6. To launch product, lift completely and place in water. Large items may require many extra 

people to accomplish this. Never drag product as damage may occur.

7. When connecting multiple items together, always follow manufacturer’s 

recommendations. Use only Aquaglide Two-Step Vario-lock cinch straps and connecting 

rings.  Make sure connection is tight and there is NO GAP between items. Failure to connect 

items properly may result in injury or death. See D1 - D6.  

a. Attach straps to ‘Connectors’ (example: Solarium, Swimstep, Splashmat, Speedway, 

Breezeway or Deck) where a connection is required. Connectors should not be attached 

to other connectors. 

b. Use all available rings to make connection. Standard connections use 5 rings. Some 

items use 3 or occasionally 7 rings/ straps. Lugeway 20 is a feature item with 5-ring sets 

on 2 ends.

c. Float ‘Connector’ into desired position. Note: a matching set of connecting rings is 

required on feature item.

d. Attach center strap to center ring on feature item. Connect loosely, then work outward 

until all straps are connected.

e. Dive beneath to tighten all straps securely. Dive mask and several attempts may be 

required.

D-1

D-4

D-5

D-6

D-2

D-3

Summary of Contents for LUGEWAY 20





























Reviews: