TM Reverse Osmosis Water Filtration System
Product Code: SYS-RO924TM5
Page
4
of
15
INSTALLATION
This system comes complete with an installation kit enabling it to be connecte
d to 15mm (½”) copper pipe (cold supply only
- hot
water should be filtered prior to heating). Included is a control valve incorporating backflow prevention, anti hammer, flow control
and pressure limiting capabilities in full compliance with the relevant laws.
INSTALLATION REQUIREMENTS
1.
13 mm (½”) Cold water line.
2.
Min/Max pressure: 300 - 600 kPa.
3.
Min/Max temperature 0° - 30°C (protect from freezing).
4.
Suitable location for faucet.
Alternative fittings may be required if being connected to anything
other than 15mm (½”) copper pipe. No electrical or drainage
requirements needed.
