Page - 5
Display
Display
Description
Entry code required
The heat pump has a user lock enabled.
See "
Using Entry Code to Access Heat
No water flow
No water flow is detected. The filter
pump is off or the heat pump is not
receiving the correct water flow.
Primary Heat Pump
Primary heat pump controlling other
connected heat pumps
Remote Controlled - by master
(primary) Heat Pump
Heat Pump is set to be controlled by
another connected heat pump.
Remote Controlled - by
external controller
Heat Pump is set to be controlled by an
external controller.
Set to 75° F - Maintaining
Maintaining a water temperature set on
the thermostat. In this example, the pool
thermostat has been set to 75° F.
Set to 45° F - Cooling
Cooling water to point set on the
thermostat. In this example, the pool
thermostat has been set to 45° F.
Set to 75° F - Heating
Heating water to point set on the
thermostat. In this example, the pool
thermostat has been set to 75° F.
Set to Off
The heat pump has been deactivated
using the "Mode / Enter" button.
1
-
O
pe
ra
ti
on
Summary of Contents for HeatWave SuperQuiet SQ120R
