Aquacal GBB, Installation Manual

Page: 7 / 78

Page - 3
1 - Installation
WARNING
Failure to heed the following may result in injury or death.
l
Installation of this equipment by anyone other than a qualified installer can result in a safety hazard.
l
The information contained throughout the "Installation" section is intended for use by qualified installation
technicians familiar with the swimming Pool/Spa safety standards.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Failure to protect equipment against corrosive conditions will adversely affect the life of the equipment and will
void equipment warranty.
IN THIS SECTION:
1.1 Positioning Equipment 4
1.2 Clearances 5
1.3 Dimensions 5
1.4 Plumbing 6
1.4.a Plumbing Requirements 6
1.4.b Plumbing Diagrams 7
1.4.c Water Connections to Heat Pump 10
1.4.d In-Line Chlorine Feeders 10
1.4.e Water Flow Rates 11
1.4.f Adjusting Water Flow Using ΔT (Delta-T) 12
1.4.g Maintaining Ability to Winterize 13
1.4.h Adjusting Water Pressure Switch 13
1.5 Electrical 14
1.5.a Electrical Requirements 14
1.5.b Access Panels 17
1.5.c Verifying Transformer Setting 17
1.5.d Three-Phase Adjustment 18
1.5.e Schematic Location 19
1.6 External Equipment 20
1.6.a Connecting a Call Flex 20
1.6.b Connecting External Controllers to Heat Pump 22
1.6.c Connecting Gas Backup Heater to Heat Pump 29
1.6.d Connecting Multiple Heat Pumps (Master / Slaved) 34
1.6.e Connecting a Pool/Spa Switching Relay 40
1.7 Program Heat Pump for the Customer 43
1.7.a Setting Date and Time 43
1.7.b Setting Time and Date Format 44
1.7.c Selecting Celsius or Fahrenheit 47
1.7.d Setting Entry Code Option 48
1.7.e Using Entry Code to Access Heat Pump 50
1.7.f Resetting Factory Defaults 50
1.8 Cleaning Equipment After Installation 52
1
-
Ins
ta
lla
tion