INSTRUCTION FOR ASSEMBLING
AND DISASSEMBLING
A
B
1. Open the valve cap by twisting counter-clockwise. Ensure the valve is
clear from debris, sand, or dirt before releasing.
2. Push valve button in and turn counter-clockwise 90 degrees so it pops up
and is in the “OUT” position.
3. Insert the pump hose and twist it 45 degree clockwise to lock in place.
Inflate until the required pressure is reached.
12PSI minimum for proper inflatable boards
operation and 15PSI maximum. Over inflation
will void your warranty.
7
①
①
Pump Set Up And Inflation
Connect the pump hose to the
gauge housing and secure it tightly.
Summary of Contents for PA-AR01
Page 1: ...EN STANDUP PADDLE BOARD User s Guide INFLATABLE...
Page 16: ...SE STANDUP PADDLE BOARD Anv ndarmanual UPPBL SBAR...
Page 31: ...NO SUP BRETT Bruksanvisning OPPBL SBART...
Page 46: ...DE STAND UP PADDLE BEDIENUNGSANLEITUNG AUFBLASBARES...
