Aqua-Marina PA-AR01, User Manual

Page: 8 / 75

8
C
D
• Electric Pumps can be used to inflate board up to 80-90%. However, the
remaining pressure required should be achieved by using the hand
pump to avoid over inflation.
• Do not use air compressors as this voids warranty of your board.
• Before long trips, ensure the board has been inflated and has
maintained pressure for a minimum of 24 hours.
PRECAUTION & TIPS
1. Inflate Faster With Less Effort
• Use full range of the pump
cylinder while keeping your
arms extended.
• Bend your knees and use the
body weight.
2. After inflation, return the valve
cover and tighten in clockwise
direction to lock in place.
Slide-in Center Fin Installation
Once the board is inflated, slide in the Center Fin to the fin box and secure
the push-in pin.